|
Bahasa: EN | BM |
Magnetic Mixer UltraPure

Berkongsi:


Magnetic Mixer UltraPure

Kuantiti Ada Stok



Alfa Laval magnetic mixers maximize product yield in biotech, pharmaceutical and other aseptic applications with high hygienic demands. The unique levitating impeller design enables effective mixing right down to the last drop.

Maximum yield magnetic mixer

Alfa Laval magnetic mixers represent a breakthrough in mixing technology. The unique levitating impeller design allows the mixer to operate under dry conditions, making it possible to mix down to the last drop. This minimizes product loss, which may positively impact process economy. In biotech and pharmaceutical applications, where product is particularly valuable, these savings can pay back the initial cost of investment, including the mixer, installation, testing and revalidation, in just a matter of weeks.

Wide range of speeds

The levitating impeller design eliminates friction, making it possible to mix at speeds ranging from 10 to 600 rpm. The 4 sizes of mixers enables the flexibility to handle a wide range of fluid types and mixing duties, such as high intensity mixing and gentle product mixing.

Gentle product treatment

The unique eight-wing design of the impeller delivers efficient mixing at very low speeds. This ensures the most gentle product treatment possible with very low share forces.

Unparalleled hygiene, optimized operation

The magnetic mixer range offers unparalleled hygiene due to its levitating impeller design. The mixer rotates at very low rpm during cleaning, resulting in a more effecient cleaning. Because there are no entrapment areas, the magnetic mixer can be completely drained of product and cleaning solutions. The open design also ensures full coverage by the cleaning solution and contributes to efficient removal of product residues. The lack of friction also minimizes product contamination from wear particles.

Fully documented

Alfa Laval MM UltraPure magnetic mixers are backed by the assurance of our comprehensive documentation package, securing safe material and full traceability.

The magnetic mixer transmits the required torque by means of magnetic coupling. The magnetic coupling consists of two sets of permanent magnets and a weld plate that separates the magnet sets. One set of magnets is mounted in the impeller (1) and the other set in the rotor (6). When the rotor revolves by means of the gear drive, the interaction between the two sets of magnets creates a magnetic coupling, which strenghting the rotation of the impeller. To avoid loss of magnetic coupling, it is necessary to gradually ramp up the rotation by means of a frequency inverter. The typical ramp up time is approximately 30 seconds. The frequency inverter is also used to adjust the speed.

 

Since the magnetic field couples across an air gap and through the weld plate(4), the tank is not compromised and therefore does not require a seal. This eliminates the risk of leakage and product contamination.

The unique design of the Alfa Laval magnetic coupling ensures the levitation of the impeller at all times. This enables the complete drainability of process fluids and the free flow of CIP liquid and steam around all parts of the mixer, thereby ensuring thorough cleaning. Impeller levitation also eliminates axial wear.

The eight-winged impeller design ensures balanced operation at very low speeds and minimize wear of the bearings (2). Male bearings can easily be replaced with a bearing tool.


Magnetic Mixer


 Pertanyaan - Magnetic Mixer UltraPure