|
Language: EN | BM |
MS Series - Modular Multistage Pump

Share:


MS Series - Modular Multistage Pump

Quantity: In Stock



The SIHImulti pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN 25199.

Benefits: SIHImulti

• Advanced modular design reduces the number of parts while maximizing interchangeability. 

• Optimal selection of impeller diameter and diffuser size installed in a standardized casing ensures that the pump matches the required duty for each application. 

• The first stage of each pump size is equipped with a low required NPSH suction impeller. 

• Axial thrust is hydraulically balanced by a patented balanced drum system with self-adjusting throttle device. 

• Generously sized angular contact ball bearings absorb residual thrust. 

• The pump can be built with an axial, vertical, left or right suction and a vertical, left or right discharge in any combination. 

• All pump sizes can be provided with one or more "dummy" stages, if required.

Features: SIHImulti

• The pump is driven from the discharge side and the rotor is supported on the side by grease-lubricated anti-friction bearings and on the suction side by self-adjusting sleeve bearing lubricated by the pumped liquid. 

• The pump feet are mounted to the suction and discharge casings in such a manner that the suction casing (for suction casings with radial branch) and discharge casing can be swung to suit the installation conditions. 

• Casing components are sealed by O-rings and held together with tie rods. 

• The balancing line is returned to the suction casing or to the upstream vessel. 

• The mechanical shaft seal is located on the drive side only. Sealing can be (cooled or uncooled) single acting mechanical seal, packed gland (cooled or uncooled) or double-acting mechanical seal (uncooled).

Technical Data:

Flow rate max. 1100 GPM (250 m³/h)
Head max. 2067 feet (630 m)
Speed max. 3600 rpm
Temperature 14 to 356 F (-10 to +180°C)
Pressure Rating max. 914 psi (63 bar)
Shaft seal mechanical seal 
packed gland

Industries:

  • Power
  • Water & Wastewater Treatment Plants
  • Irrigation
  • Chemical & Process
  • Pharmaceutical
  • Food
  • And many More

Applications:

  • Boiler feed
  • Condensate systems
  • Pressure boosting
  • Irrigation
  • High pressure cleaning
  • Heating
  • Waterworks, and water supply
  • Reverse osmosis
  • Chemical and Process
  • And many more ...
  •  



 Inquiry - MS Series - Modular Multistage Pump