- Mechanical Seal
- Sanitary Flow Equipment
- Vacuum, Blowers And Compressor Pumps
- Rotary Vane Vacuum Pumps, Oil-Free
- Radial Blowers
- Liquid Ring Vacuum Pump
- Roots Blowers, Bora
- Centralised System
- Dry Vacuum Pumps
- Gas Ejectors
- Liquid Ring Compressors
- Liquid Ring Vacuum Pump in Compact Design
- Liquid Ring Vacuum Pump with Auto recirculation System
- Liquid Ring Vacuum Pumps in Bare Shaft Design
- Radial Vacuum Pumps
- Rotary Vane Compressor
- Rotary Vane Vacuum Pumps, Oil-Lubricated
- Screw Compressor
- Screw Vacuum Pumps
- Side Channel Ring Blowers
- Side Channel Vacuum Pumps
- View All
- Centrifugal Pump 1
- Positive Displacement Pumps
- Simple Application Pumps
- Tank Cleaning Equipment
- Centrifugal Pump 2
- Dual Disc Pump
- Engineered Systems
- Ex-Proof Motors
- Liquid Pump
- Industrial Standard Pumps in Compact Design
- Chemical Process Pumps
- Heat Transfer Pumps for Hot Oil
- Heat Transfer Pumps for Hot Water
- High Pressure Pumps
- Hygienic Liquid Pumps
- Industrial Standard Pumps in Bare Shaft Design
- Industrial Standard Pumps in Inline Design
- Side Channel Pumps in Bare Shaft Designs
- Side Channel Pumps in Compact Designs
- Side Channel Pumps in Inline Design
- Sludge Mixers
- View All
- Single Disc Pumps
- Sliding Vane Pumps
- Accessories
- Others
1, Jalan Serendah 26/41,
Hicom Industrial Estate,
40400 Shah Alam,
Selangor, Malaysia.
Bandar Perda,
14000 Bukit Mertajam,
Penang, Malaysia.


Taman Iskandar,
80050 Johor Bahru,
Johor, Malaysia.


HCMC Office:
Binh Thanh Dist.,
HCMC, Vietnam.


Ha Noi Office:
E16, 4th Flr, Sun Anrora Building
No 3, Luong Yen Street, Bach Dang Ward, Hai Ba Trung Dictrict, Ha Noi, Vietnam.

PT Kampak Peralatan Aliran
JL. Raya Perjuangan
No. 8, Kebun Jeruk
Jakarta Barat,
Jakarta 11530, Indonesia.


Modular S Centrifugal Pump
Previous | 3 / 20 | Next |
Typical applications:
- Draining building excavations
- Emptying ponds, drains and swimming pools
- Water extraction for irrigation and watering
- General service pumps
- Fuel handling
- Condensate extraction pumps
Self-Priming Centrifugal Pump
The series of DESMI MODULAR S pumps represents one of the most distinctive developments in self-priming pumps. Based on many years of experience in the production of self-priming pumps we supply a pump series that meets the future demands for economical and reliable pumps.
The individual design, compact with a clear-cut cylindrical form, together with the practical advantages such as easy assembling and MODULAR construction of all components ensure a long and positive operation.
This priming priciple means that the MODULAR S can pump a mixture of air and liquid and thus evacuate air from the suction pipe. Thus, priming can be avoided and a foot valve is not necessary.
The pumps of the MODULAR S series can be supplied as free shaft end, mounted on the base plate with petrol or diesel engine, hydraulic or electric motor or in a close-coupled design with electric motor. They can also be fitted with a manual friction clutch and V-belt pulley and with step-up bevel gear ratio 1:2.
MODULAR S/02 Self-priming centrifugal pumps in close-coupled design
This version of the well-known MODULAR S pump meets the requirements for a compact and reliable pump and does not need special alignment. The pump is
connected to the electric motor via a rigid coupling and can be mounted with any standard electric motor. The MODULAR S pump is constructed of standard components and this principle has been further emphasized in the monobloc version.
For optimum flexibility the pump is designed in such a way that only the coupling and the motor flange have to be changed in order to fit the selected electric motor. The monobloc version is equipped with a separate bearing house with only one bearing, and the rigid coupling is mounted on the short shaft.
Capacity range: 1-350 m3/h ~ 5-1500 US gpm at 50 cycles 2-400 m3/h ~ 10-1760 US gpm at 60 cycles |
Pressure range: 1-100 mLC~ 3-330 ft at 50 Hz 2-150 mLC ~ 6-490 ft at 60 Hz |
Temperature range: With standard mech. shaft seal max. 80oC ~ 176°F, with special mech. shaft seal max. 120oC ~ 248°F. |