ABS Engineering & Trading Sdn Bhd
1, Jalan Serendah 26/41,
Hicom Industrial Estate,
40400 Shah Alam,
Selangor, Malaysia.
+603-5103 8978
Northern Office:
17, Lorong Perda Utama 7,
Bandar Perda,
14000 Bukit Mertajam,
Penang, Malaysia.
Southern Office:
12, Jalan Bentara 1,
Taman Iskandar,
80050 Johor Bahru,
Johor, Malaysia.

ABS Engineering Vietnam Limited (ABS VN):

HCMC Office:
168E D2 St., W.25,
Binh Thanh Dist.,
HCMC, Vietnam.
+84. 28.6258 7752
+84.28.6258 7754

Ha Noi Office:
E16, 4th Flr, Sun Anrora Building
No 3, Luong Yen Street, Bach Dang Ward, Hai Ba Trung Dictrict, Ha Noi, Vietnam.
+84 24.6659 8001

PT Kampak Peralatan Aliran
JL. Raya Perjuangan
No. 8, Kebun Jeruk
Jakarta Barat,
Jakarta 11530, Indonesia.
021-2977 8178
021-2977 7754

Petroland Sliding Vane Pumps

Petroland Sliding Vane Pumps Sliding Vane Pumps
Add Quotation

Petroland sliding vane pumps are specially designed to comply with the pumping requirements demanded by the LPG industry. Bulk delivery of LPG requires the use of heavy duty, reliable equipment and is an important part of every LPG markets. The equipment used in modern bulk trucks must be designed and constructed to perform in a broad spectrucm of operations conditions.

Sliding vane design is ideal for, LPG, butane, propane, freon, fuel, gasoline, DME, anhydrous ammonia, propellants, refrigerants and similar liquefied gases.

Utilizing unique sliding vane design, these positive displacement pumps offer the best combined characteristics of sustained high level performance, energy efficiency, trouble-free operation and low maintenance cost.

Pump models are available in 1.5" to 4" port sizes. All models have ductile iron construction for thermal shock resistance, low friction ball bearings for high efficiency and quiet operation. 

  Max. Capacity: 65 m3/h
  Max. Diffr. Pressure: 8.5 bar 
  Max. Viscosity: 100 cSt
  Temperature Range: -30 0C to +150 0C


  • Application variety with 8 different casing size
  • They require less horsepower than other positive displacement pumps. So you spend less on motors initially and less on electricity to operate the pumps after they are installed
  • High capacity at lower speeds. These lower operating speeds mean quiter operation, longer service life and reduced maintenance requirements.
  • Can be used same pump for filling and discharge with both direction properties
  • Self-adjusting vanes keep performance high
  • Vane replacement in easy inspection and no special tools require
  • Replaceable casing liner and end disc
  • Advanced polymer
  • Internal relief valve
  • Self-priming
  • Cavitation sppression liner
  • The design allows only mechanica seal (Dual).
  • Dual-Ended shaft allows for both direction
  • These vane pumps can be coupling with V-Belt, Hydro motor or Gearbox
  • Connection type options are ANSI & DIN Flange or BSP&NPT threaded connection


  • These vane pumps can be coupling with V-Belt, Hydro motor or Gearbox
  • Connection type options are ANSI & DIN Flange or BSP&NPT threaded connection
  • V-Belt coupling mostly used for truck application to less space
  • Hydromotor coupling is mostly used where the no electric. 


Working Principle

As shown in Figueres, the pumps use a rotor with sliding vanes that draw the liquid in behind each vane, through the inlet port and into the pumping chamber. As the rotor turns, the liquid is transferred between the vanes to the outlet where it is discharged as the pumping chamber is squeezed down. Each vane provides a positive mechanical push to the liquid before it. 

Vane contact with the chamber wall is maintained by three forces:

  • Centrifugal force from the rotors rotation
  • Push rods moving between opposing pairs of vanes 
  • Liquid pressure entering through the vane grooves and acting on the rear of the vanes
Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
Ship to Name  
Shipping Address  
*only support gif, jpeg, jpg, png, pdf

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version